PORTABLE LOW WASTE MARINE AQUARIUM REVERSE OSMOSIS RODI + JUMBO RO DI

PRO5-DJ Low Waste* Portable & Wall Mountable Reverse Osmosis RO DI Purifier + All Filters - Suitable for Marine Aquarium

Depending on variation selected in drop down menu above we will supply as follows:

This system is locally assembled using high quality approved parts

*Unit is setup with the waste of the 1st membrane feeding the inlet of the 2nd membrane [in series] to reduce the waste ratio of the unit which will result in slightly higher DI resin use. If you want the membrane setup in parallel for maximum flow and not reduced waste we can do so but you'll just need to send us a message when checking out asking for this change.

Standard pre-filters will filter +/- 10,000 litres of water before needing to be changed [based on total flow of pure + waste water] whereas the high flow combination of pre-filters will allow +/- 35,000 litres to be filtered before the pre-filters need to be changed.

SYSTEM INCLUDES:

• Powder coated, mild steel folded bracket
• 3x 10"x2.5" white or clear tinted filter housings [vertical ones]
• 1x 10"x2.5" 0.5uM poly spun sediment filter
• 1x 10"x2.5" selected carbon block pre-filter
• 1x 10"x2.5" jumbo post RO mixed DI resin filter [2.5x as much resin as in line post filters]
  
• 2x high quality reverse osmosis membranes [flow rate depends on selection in drop down menu]
• 3x meters of high pressure 1/4" | 6mm water filter tubing
• 1x opening + closing housing ring spanner
• 1x standard* sink mixer diverter connector
• 2x garden tap connectors for 1/2" + 3/4" taps

* Standard mixer taps refer to a mixer tap where you can