Welcome to our store

Sentry Water Filters

Reverse Osmosis Water Filters Omnipure USA Filter + FilmTec RO Membrane

$429.50

$429.50

Sale

Select RO Pre-Filters 2x Vertical Housings 3x Vertical Housings

Select RO Tank Size 5L Buffer Tank 8L Buffer Tank 12L Buffer Tank

Add Mineraliser Filter YES - Add Aquapro mineraliser NO - Mineraliser not required

Quantity

REVERSE OSMOSIS WATER FILTERS OMNIPURE USA FILTER + FILMTEC RO MEMBRANE

Reverse Osmosis Water Filters Omnipure USA - Premium 4/5-Stage USA Reverse Osmosis Water Purifier

NB: INCLUDES GENUINE USA DUPONT FILMTEC MEMBRANE FILTER + USA OMNIPURE FILTERS

THIS SYSTEM IS ASSEMBLED, LEAK + PRESSURE TESTED + PERFORMANCE RATED LOCALLY AT OUR QLD PREMISES

Our locally assembled reverse osmosis units are designed to provide the purest possible drinking water at a reasonable price. All of our locally assembled units are leak tested overnight under pressure and checked to ensure that they are operating optimally and producing water of a standard that meets our quality guidelines.

Reverse osmosis technology is known for its ability to produce pure water of a consistent quality, typically reducing the total contaminant in the feed water by +/- 95% on average. Our systems are effective in removing various contaminants from your drinking water, including fluoride, chlorine, cysts, bacteria and heavy metals among many other contaminants as indicated in the table below.

CONTAMINANT	REDUCTION	CONTAMINANT	REDUCTION
Barium	98%	Potassium	100%
Bicarbonate	100%	Radium	97%
Cadmium	98%	Selenium	97%
Calcium (Hardness)	100%	Silicate	99%
Chromate	96%	Silver	99%
Copper	98%	Sodium	98%
Detergents	98%	Strontium	97%
Fluoride	100%	Sulphate	100%
Lead	99%	PCB’s	98%
Magnesium	100%	Insecticides	98%
Nickel	99%	Herbicides	98%

All of the parts that come into contact with the water in our systems are manufactured from BPA free food grade plastics. All of the filters and parts that we source are of the highest quality and meet the required quality standards

SYSTEM SPECIFICATIONS:

Minimum feed pressure	45psi / 300kpa
Recommended feed pressure	60-80psi / 400-550kpa
Minimum operating temperature	5°C / 40°F
Maximum operating temperature	45°C / 110°F
Minimum feed water pH	pH 3
Maximum feed water pH	pH 11
Maximum feed water TDS	1,000ppm*
Production rate	50GPD / 190LPD

*Where the feed water TDS reading is high, the minimum operating pressure of the unit may be affected. If your feed water TDS is in excess of 500ppm we recommend that you consult us before you purchase. Generally these systems are suited to most town mains water supplies, however if you are intending to use the unit on tank or bore water we recommend testing the feed pressure and water quality first.

KIT INCLUDES:

Multi stage reverse osmosis unit:

Watermark 10"x2.5" pre-filter housings.
One ITM 0.5uM sediment pre-filter (not USA made).
One/Two Omnipure USA made carbon block filter.
One new generation FilmTec 50GPD USA membrane.
One Omnipure USA made in line post membrane carbon water filter.
Aquapro mineralising + ceramic filter [if selected / made in Taiwan]
One approved pressure reducing valve [Australian Standards AS3497].

Your choice of one of the following accumulator tanks:

5 Litre - (33cm height, 20cm diameter).
8 Litre - (35cm height, 22cm diameter).
12 Litre - (35cm height, 28cm diameter).

Feed/inlet fittings included:

1x 1/2" insert - Shares cold water line to most mixer taps.
1x 3/4" insert - Shares cold water line to most dishwashers.

A small deluxe modern faucet as pictured in images.
A leak detection shut off device + 2x sensor pads.
A housing spanner to open water filter housings.
An full installation kit to cover all standard installation.
An installation and maintenance guide.

This RO unit has a 3 year warranty which is subject to our warranty terms and conditions and is installed with a pressure reducing valve

This listing includes a 350kpa pressure reducing and non-return valve as required by Australian Standards AS3497. We also recommend that a leak detector shut off device is installed with any water filter and / or reverse osmosis system which is under pressure.

Why Choose a Reverse Osmosis Filter with Omnipure and Filmtec Filters?

This Premium 4/5-Stage USA Reverse Osmosis Water Purifier is a high-quality system that uses genuine DuPont Filmtec and Omnipure filters from the USA. It is locally assembled and rigorously tested to ensure optimal performance, consistently reducing total contaminant levels by an average of 95%. This system provides a reliable and effective solution for producing exceptionally pure drinking water in your home.

Compact Design and Powerful Performance

The unit includes an AS3497-compliant multi-stage reverse osmosis unit. It features an ITM 0.5-micron spun sediment pre-filter and one or two Omnipure USA-made carbon block pre-filters. The core of the system is a new-generation FilmTec 50GPD USA membrane. A post-membrane filter, either an Omnipure carbon filter or a mineralising/ceramic filter, is also included. The system can produce 190 litres per day and comes with your choice of a 5, 8, or 12-litre accumulator tank.

Seamless Integration and Easy Maintenance

This RO system comes with a complete installation kit, including a modern all-chrome faucet, a 350kpa pressure reducing valve, a leak detection and shut-off device, tubing, and fittings to connect to your cold water line. The system is easy to install and all parts that contact the water are made from BPA-free food-grade plastics. The unit is backed by a 3-year warranty for peace of mind.