Sentry Water Filters
Reverse Osmosis | Water Filter Faucet Taps RO Drinking Faucet Tap
REVERSE OSMOSIS | WATER FILTER FAUCET TAPS RO DRINKING FAUCET TAP
Filtered Drinking Water Filter Faucet Taps
All these faucets have a shiny chrome finish except for the brushed nickel one which has a satin finish faucet and the matte black one.
This listing is for a drinking water filter faucet / tap only and does not include a water filter or reverse osmosis filtration system.
This faucet can be fitted to any water filter system using 1/4" tube [OD = 6mm] and is supplied with an olive, insert and compression nut as standard. You can select to have a quick fit connector added to your order for $5 extra which screws onto the bottom of the faucet [does not require thread tap as it has an O-Ring in the fitting] and the tube just pushes into the tube side of the fitting. It's important which these quick fit fittings to not overtighten them as they are a polymer fitting so overtightening them with a spanner can cause them to crack. If you firmly hand tighten them or lightly with a tool and observe there are drips for a day after fitting them that will be sufficient.
Great quality + Lead free + Manufactured according to Australian standards
Approved In Australia For Use With Under Sink Water Filters And / Or Reverse Osmosis Purification Systems | WELS Not Applicable
This faucet carries a full 12 month warranty on all parts supplied in the original order, this subject to our standard terms and conditions listed in our operating manual
According to regulatory standards any water filter system under constant water pressure [regardless of the brand or supplier] is required to be fitted with an AS3497 approved pressure reducing valve and back-flow prevention device which we have listed separately. We also recommend that a leak detector shut off device is installed with any water filter and / or reverse osmosis system that is under pressure which we have listed separately on our store.
If you are not entirely satisfied with your purchase please contact us so that we can resolve your concerns.
Why Choose this Water Filter Faucet?
This faucet is a high-quality, lead-free dispensing tap designed for use with any standard under-sink water filter or Reverse Osmosis (RO) purification system. It is manufactured according to Australian standards and is approved for use in Australia, offering a reliable, dedicated outlet for purified drinking water.
Compact Design and Powerful Performance
The faucet is designed to connect easily to any water filter system using standard () outside diameter tubing. It is supplied with the standard components needed for a compression fitting: an olive, an insert, and a compression nut. For an extra cost, a quick-fit connector can be added. This connector screws onto the bottom of the faucet (using an O-ring for the seal, eliminating the need for plumbing tape) and allows the tubing to simply push into the fitting. A cautionary note is provided: when using the quick-fit connector, it is important not to overtighten the polymer fitting with a spanner, as this can cause it to crack; firm hand tightening or light use of a tool is sufficient.
Seamless Integration and Safety Note
This faucet provides a dedicated, warrantied (12 months) dispensing point for your filtered water. The description emphasizes the crucial regulatory standard that any water filter system under constant pressure must be fitted with an AS3497 approved pressure reducing valve and back-flow prevention device. It is also strongly recommended to install a leak detector shut off device with any pressurized water filter or RO system for enhanced safety.