PFAS PFOA Forever Chemicals Removal Reverse Osmosis Water Filter
- Vendor
- Sentry Water Filters
- Regular price
- $459.50
- Sale price
- $459.50 Sale
PFAS / PERFLUOROALKYL AND POLYFLUOROALKYL "FOREVER CHEMICALS"
7 STAGE REVERSE OSMOSIS WATER PURIFIER
SPECIALLY DESIGNED WITH MOST EFFECTIVE PRE-FILTERS, RO MEMBRANE, WASTE RATIO AND POST FILTER COMBINATION FOR HIGHER REMOVAL OF PFAS, FOREVER CHEMICALS FROM DRINKING WATER
THIS SYSTEM IS ASSEMBLED LOCALLY AT OUR PREMISES IN QLD
CONTAMINANT |
REDUCTION |
CONTAMINANT |
REDUCTION |
Barium |
97% |
Potassium |
99.9% |
Bicarbonate |
99.9% |
Radium |
97% |
Cadmium |
97% |
Selenium |
97% |
Calcium (Hardness) |
99.9% |
Silicate |
99% |
Chromate |
95% |
Silver |
99% |
Copper |
97% |
Sodium |
98% |
Detergents |
97% |
Strontium |
97% |
Fluoride |
99%-99.9% |
Sulphate |
99.9% |
Lead |
97% |
PCB’s |
97% |
Magnesium |
99.9% |
Insecticides |
97% |
Nickel |
97% |
Herbicides |
97% |
All of the parts that come into contact with the water in our systems are manufactured from BPA free food grade plastics. All of the filters and parts that we source are of the highest quality and meet the required quality standards.
SYSTEM SPECIFICATIONS:
Minimum feed pressure |
45psi / 300kpa |
Recommended feed pressure |
60-80psi / 400-550kpa |
Minimum operating temperature |
5°C / 40°F |
Maximum operating temperature |
45°C / 110°F |
Minimum feed water pH |
pH 3 |
Maximum feed water pH |
pH 11 |
Maximum feed water TDS |
1000ppm* |
Production rate |
50GPD / 200LPD |
*Where the feed water TDS reading is high, the minimum operating pressure of the unit may be affected. If your feed water TDS is in excess of 400ppm we recommend that you consult us before you purchase. Generally, these systems are suited to most town mains water supplies, however if you are intending to use the unit on tank or bore water we recommend testing the feed pressure and water quality first.
KIT INCLUDES:
- Multi stage reverse osmosis unit:
- AS3497 tested and compliant 10"x2.5" pre-filter housings.
- 1x 10"x2.5" 0.5 micron spun sediment pre-filter.
- 1x 5uM Matrikx KX chloramine reduction Hi-Vol CBC.
- 1x 0.5uM Matrikx Pb1 heavy metals & chloramine CBC.
- 1x 50GPD Filmtec Dow / Du Pont USA made membrane.
-
3x inline post RO filters as selected in drop down menus.
- Your choice of one of the following accumulator tanks:
- 5 Litre - (33cm height, 20cm diameter).
- 8 Litre - (39cm height, 22cm diameter).
- 12 Litre - (39cm height, 28cm diameter).
- Includes 1/2" insert - shares normal cold water line to most mixer taps but if you need a 3/4" insert to share the tap feeding your dishwasher send a message when checking out asking for us to make this change to your order.
- Includes leak detection and shut off device.
- 50mm adjustable waste drain line clamp.
- Optimal waste ratio for what is best suited to your local post code mains water and set higher then a typical reverse osmosis water filter to allow a higher percentage of forever and other synthetic chemicals to be flushed away which results in purer produce water.
- Modern style faucet as selected in drop down menu.
- An approved 350kpa pressure reducing valve as required by Australian standards.
- A housing spanner to open and close water filter housings.
- An installation kit including a roll of tubing, a roll of thread tape, spare fittings.
- An installation and maintenance guide.
This RO unit has a 36-month warranty which is subject to our warranty terms and conditions and is installed with a pressure reducing valve and leak shut off device
This listing includes a 350kpa pressure reducing and non-return valve as required by Australian Standards AS3497. We also recommend that a leak detector shut off device is installed with any water filter and / or reverse osmosis system which is under pressure.
If you are not entirely satisfied with your purchase please contact us so that we can resolve your concerns.
- choosing a selection results in a full page refresh
- press the space key then arrow keys to make a selection