ZIP Own It Now, Pay Later Available + Free Shipping Australia Wide!

Sentry Water Filters Reverse Osmosis RO PRO4 DJ Clear Unit
Sentry Water Filters Reverse Osmosis RO PRO5 DJ Solid White Unit
Standard Volume Pre-Filters Spun Sediment, Carbon Block
High Volume Pre-Filters Spun Sediment, Matrikx CTO Carbon Block
Reverse Osmosis RO Water Filter tubing 3m
Diverter 1/4" tap
John Guest Garden Tap connector
Empty Refillable Water Filter
Deionising Mixed DI Resin Filter
Deionising Mixed DI Resin Refill
Sentry Water Filters Reverse Osmosis RO 50gpd membrane
Sentry Water Filters Reverse Osmosis RO 75gpd membrane
Sentry Water Filters Reverse Osmosis RO 100gpd membrane
Sentry Water Filters Reverse Osmosis RO 150gpd membrane
Reverse Osmosis RO Membrane Asprinn 180gpd

Portable Low Waste Marine Aquarium Reverse Osmosis RODI + Jumbo RO DI

Vendor
Sentry Water Filters
Regular price
$275.00
Sale price
$275.00
GST Included + FREE SHIPPING

PRO5-DJ Higher Volume* Lower Waste* Portable & Wall
Mountable Reverse Osmosis RO DI Purifier + All Filters

Depending on variation selected in drop down menu above we will supply as follows:

Membrane

Flow Rate

Water Connector

Recommended Use

1st-50GPD
2nd-50GPD

   12LPH

Sink Mixer & 1/2”
+ 3/4” Garden Taps

Marine Aquariums + Some Freshwater Fish Tanks

1st-75GPD
2nd-50GPD

   18LPH

Sink Mixer & 1/2”
+ 3/4” Garden Taps

Marine Aquariums + Some Freshwater Fish Tanks

1st-100GPD
2nd-50GPD

   20LPH

Sink Mixer & 1/2”
+ 3/4” Garden Taps

Marine Aquariums + Some Freshwater Fish Tanks

1st-150GPD
2nd-100GPD

    25LPH

Sink Mixer & 1/2”
+ 3/4” Garden Taps

Marine Aquariums + Some Freshwater Fish Tanks

1st-180GPD
2nd-100GPD

    40LPH

Sink Mixer & 1/2”
+ 3/4” Garden Taps

Marine Aquariums + Some Freshwater Fish Tanks

1st-180GPD
2nd-150GPD

    45LPH

Sink Mixer & 1/2”
+ 3/4” Garden Taps

Marine Aquariums + Some Freshwater Fish Tanks

This system is locally assembled using high quality approved parts

*Unit is setup with the waste of the 1st membrane feeding the inlet of the 2nd membrane [in series] to reduce the waste ratio of the unit which will result in slightly higher DI resin use. If you want the membrane setup in parallel for maximum flow and and not reduced waste we can do so but you'll just need to send us a message when checking out asking for this change.

Standard pre-filters will filter +/- 10,000 litres of water before needing to be changed [based on total flow of pure + waste water] whereas the high flow combination of pre-filters will allow +/- 35,000 litres to be filtered before the pre-filters need to be changed.

SYSTEM INCLUDES:

  • Powder coated, mild steel folded bracket
  • 3x 10"x2.5" white or clear tinted filter housings [vertical ones]
    • 1x 10"x2.5" 0.5uM poly spun sediment filter
    • 1x 10"x2.5" selected carbon block pre-filter
    • 1x 10"x2.5" jumbo post RO mixed DI resin filter [2.5x as much resin as in line post filters]
  • 2x high quality reverse osmosis membranes [flow rate depends on selection in drop down menu]
  • 3x meters of high pressure 1/4" | 6mm water filter tubing
  • 1x opening + closing housing ring spanner
  • 1x standard* sink mixer diverter connector
  • 2x garden tap connectors for 1/2" + 3/4" taps

* Standard mixer taps refer to a mixer tap where you can unscrew the aerator on the end of the tap and will be left with either a 20mm female thread or a 23mm male thread. If you have the 20mm female thread you'll need to use the inside to outside thread converter [supplied with the diverter valve] to connect but if you have a 23mm male thread after removing the aerator you won't need to use the thread converter

Easy to carry around and great for topping up freshwater aquariums, caravaning, camping and home use + produces 190-685 litres per day depending on mains water pressure, feed water quality and system selected

The reverse osmosis process results in the purest possible water and results in the total dissolved solids (TDS) count dropping by between +/- 99.9% and 100% with a post membrane DI

This purification process is commonly considered to be the most effective method of purification available to the public, and will consistently produce the lowest level of contaminant.

RO will reduce/remove all of contaminant in the feed water including chlorine, fluoride, volatile organic compounds, disinfection by-products and heavy metals

See below table for effective reduction of common contaminants:

ELEMENT /
COMPOUND

% REDUCED

ELEMENT /
COMPOUND

% REDUCED

Barium

99.99%

Potassium

100%

Bicarbonate

100%

Radium

99.99%

Cadmium

99.99%

Selenium

99.99%

Calcium (Hardness)

100%

Silicate

100%

Chromate

99.99%

Silver

100%

Copper

99.99%

Sodium

100%

Detergents

99.99%

Strontium

99.99%

Fluoride

100%

Sulphate

100%

Lead

100%

PCB’s

99.99%

Magnesium

100%

Insecticides

99.99%

Nickel

99.99%

Herbicides

99.99%


All of the parts that come into contact with the water in our systems are manufactured from BPA free food grade plastics. All of the filters and parts that we source are of the highest quality and meet the required quality standards.

Membrane brand/s of the membrane supplied with the system may vary depending from those depicted what we have in stock but will be of equivalent quality

This RO system is a multi-stage pumpless system. It is designed to operate on mains pressure and will produce with feed water pressure of 45psi or greater.

This RO unit has a 36 month warranty which is subject to our warranty terms and conditions and is installed with a pressure reducing valve and leak shut off device

If you are not entirely satisfied with your purchase please contact us so that we can try to resolve your concerns