Portable + Wall Mountable Reverse Osmosis Purifier + Filters
Depending on variation selected in drop down menus above we will supply as follows:
Item #
|
Post Membrane
|
Membrane (Gallons Per Day)
|
Waste / Flush Valve
|
PRO-4-G
|
Coconut Carbon
|
50GPD/ 75GPD/ 100GPD OR 150GPD / 200GPD
|
YES, allows you to adjust the waste ratio on the unit depending on local water quality*
|
PRO-4-A
|
Alkalising + Carbon
|
50GPD/ 75GPD/ 100GPD OR 150GPD / 200GPD
|
YES, allows you to adjust the waste ratio on the unit depending on local water quality*
|
PRO-4-N
|
Silver Anti-bacterial
|
50GPD/ 75GPD/ 100GPD OR 150GPD / 200GPD
|
YES, allows you to adjust the waste ratio on the unit depending on local water quality*
|
PRO-4-NG
|
Mineral + Carbon
|
50GPD/ 75GPD/ 100GPD OR 150GPD / 200GPD
|
YES, allows you to adjust the waste ratio on the unit depending on local water quality*
|
This system is locally assembled by us in our Queensland factory using high quality approved parts
*We recommend you select the system with an adjustable waste valve if you will be using this travelling around Australia as water quality can vary greatly and with poorer water it's best to increase the waste ratio and with better quality water you can reduce it as not to waste as much water. You may need a TDS reader to check the quality of the water you need to filter and we have one listed as TDS Total Dissolved Solid Meter Check Reverse Osmosis Water Filters
100% Fluoride Removal + 99.99% Bacteria Elimination + Approximately 96% off impurities in water removed
Supplied with tap connectors to fit 1/2" + 3/4" garden taps which measures 20mm + 25mm in diameter and a standard clip on garden hose fitting and does not include a standard* sink mixer diver valve which is listed as Diverter Valve Counter Bench Top Water Filter Mixer Tap Reverse Osmosis Valves
* Standard mixer taps refer to a mixer tap where you can unscrew the aerator on the end of the tap and will be left with either a 20mm female thread or a 23mm male thread. If you have the 20mm female thread you`ll need to use the inside to outside thread converter [supplied with the diverter valve] to connect but if you have a 23mm male thread after removing the aerator you won`t need to use the thread converter
Easy to carry around and great for caravanning, camping and home use + produces +/- 190 to 570 litres per 24 hours depending item selected and mains water pressure and quality of feed water
4-stage filter unit with 1x spun sediment + 1x carbon block filter + 1x selected reverse osmosis membrane (50GPD/ 75GPD/ 100GPD or 150GPD) + 1x post membrane as selected
The reverse osmosis process results in the purest possible water and results in the total dissolved solids (TDS) count dropping by between +/- 96% depending on environmental factors
This purification process is commonly considered to be the most effective method of purification available to the public, and will consistently produce the lowest level of contaminant.
RO will reduce/remove all of contaminant in the feed water including chlorine, fluoride, volatile organic compounds, disinfection by-products and heavy metals
See below table for typical reduction of common contaminants by reverse osmosis
ELEMENT/COMPOUND
|
% REDUCTION
|
ELEMENT/COMPOUND
|
% REDUCTION
|
Barium
|
97%
|
Potassium
|
100%
|
Bicarbonate
|
100%
|
Radium
|
97%
|
Cadmium
|
97%
|
Selenium
|
97%
|
Calcium (Hardness)
|
99.90%
|
Silicate
|
99.00%
|
Chromate
|
95%
|
Silver
|
99%
|
Copper
|
97%
|
Sodium
|
98%
|
Detergents
|
97%
|
Strontium
|
97%
|
Fluoride
|
100%
|
Sulphate
|
100%
|
Lead
|
97%
|
PCB’s
|
97%
|
Magnesium
|
100%
|
Insecticides
|
97%
|
Nickel
|
97%
|
Herbicides
|
97%
|
All of the parts that come into contact with the water in our systems are manufactured from BPA free food grade plastics. All of the filters and parts that we source are of the highest quality and meet the required quality standards.
SYSTEM INCLUDES:
- Two White Opaque filter housings on a wall mountable bracket
- Two 10"x2.5" filter cartridges [1x 1uM sediment + 1x 5uM carbon block]
- One reverse osmosis membrane with flow rate as selected
- One post membrane in line conditioning filter as selected
- Three meters of high pressure 1/4" | 6mm water filter tube
- Tap connectors to fit a 3/4" garden tap and common garden hose clip on fitting as well as a sink mixer diverter valve
All of the parts that come into contact with the water in our systems are manufactured from BPA free food grade plastics. All of the filters and parts that we source are of the highest quality and meet the required quality standards.
This RO system is a multi-stage pumpless system. It is designed to operate on mains pressure and will produce with feed water pressure of 45psi or greater.
This RO unit has a 12-month warranty which is subject to our warranty terms and conditions, regular filter changes to be done as recommended using our replacement filters, media and consumables and is installed indoors out of direct sunlight.