Reverse Osmosis Water Filters Omnipure USA Filter + FilmTec RO Membrane

PREMIUM 4/5-STAGE USA REVERSE OSMOSIS WATER PURIFIER 

NB: INCLUDES GENUINE USA DUPONT FILMTEC MEMBRANE FILTER + USA OMNIPURE FILTERS

THIS SYSTEM IS ASSEMBLED, LEAK + PRESSURE TESTED + PERFORMANCE RATED LOCALLY AT OUR QLD PREMISES

Our locally assembled reverse osmosis units are designed to provide the purest possible drinking water at a reasonable price. All of our locally assembled units are leak tested overnight under pressure and checked to ensure that they are operating optimally and producing water of a standard that meets our quality guidelines.

Reverse osmosis technology is known for its ability to produce pure water of a consistent quality, typically reducing the total contaminant in the feed water by +/- 95% on average. Our systems are effective in removing various contaminants from your drinking water, including fluoride, chlorine, cysts, bacteria and heavy metals among many other contaminants as indicated in the table below.

All of the parts that come into contact with the water in our systems are manufactured from BPA free food grade plastics. All of the filters and parts that we source are of the highest quality and meet the required quality standards

SYSTEM SPECIFICATIONS:

*Where the feed water TDS reading is high, the minimum operating pressure of the unit may be affected. If your feed water TDS is in excess of 500ppm we recommend that you consult us before you purchase. Generally these systems are suited to most town mains water supplies, however if you are intending to use the unit on tank or bore water we recommend testing the feed pressure and water quality first.

KIT INCLUDES:

• Multi stage reverse osmosis unit:
• AS3497 tested and compliant 10"x2.5" pre-filter housings.
• One 10"x2.5" ITM 0.5 micron spun sediment pre-filter.
• One/Two 10"x2.5" Omnipure USA made carbon block pre-filter.
• One new generation FilmTec 50GPD USA membrane.
• One Omnipure USA made in line post membrane carbon water filter.
• Aquapro mineralising + ceramic filter [if selected / made in Taiwan] 
• One approved pressure reducing valve [Australian Standards AS3497].
• Your choice of one of the following accumulator tanks:
• 5 Litre - (33cm height, 20cm diameter).
• 8 Litre - (35cm height, 22cm diameter).
• 12 Litre - (35cm height, 28cm diameter).
• Feed/inlet fittings included:
• 1x 1/2" insert - Shares normal cold water line to most mixer taps.
• 1x 3/4" insert - Shares normal cold water line to most dishwasher.
• An all chrome modern style faucet as pictured in the listing images.
• Includes a leak detection and shit off device with 2x sensor pads.
• A housing spanner to open and close water filter housings.
• An installation kit including a roll of tubing, a roll of thread tape, spare fittings.
• An installation and maintenance guide.