ZIP Own It Now, Pay Later Available + Free Shipping Australia Wide!

Sentry Water Filters RO reverse osmosis PROS 5 DJ complete system image
RONS4 DJ RO reverse osmosis DI water filters aquarium solid white housing dimensions
Sentry Water Filters RO reverse osmosis 50gpd membrane
Sentry Water Filters RO reverse osmosis 75gpd membrane
Sentry Water Filters RO reverse osmosis 100gpd membrane
Sentry Water Filters RO reverse osmosis membrane 150gpd
RONS4 DJ RO reverse osmosis DI water filters aquarium clear housing
pre-filter image carbon block and spun sediment
Matrikx CTO carbon block filter chlorine chloramine Chloramines pre-filters spun sediment
Empty refillable water filter cartridge
DI mixed resin deionising filter
Diverter 1/4" tap inside outside thread countertop
connector John Guest water filter RO reverse osmosis tap
flush valve assembly image

PROS-4-DJ Reverse Osmosis RO DI - ON STAND | Marine Aquarium RODI Fish Filter

Vendor
Sentry Water Filters
Regular price
$329.50
Sale price
$329.50
GST Included + FREE SHIPPING

High Volume* Portable + Wall Mountable
Reverse Osmosis RO DI Purifier + Filters

We have this item listed without a stand separately for less here

We supply these systems with a manual first flush valve (see image 14) so you can direct the first bit of water produced out the waste line then through the RO to which allows resin to last longer. This flush valve can also be set to increase your operating waste ratio which is required in some areas where the TDS of the local water is high. 

Depending on variation selected in drop down menu above we will supply as follows:

Item

Membrane

Water Connector

Recommended Use

PRO-4-DJ

75GPD | 275LPD

Sink Mixer & 1/2”
+ 3/4” Garden Taps

Marine Aquariums + Some Freshwater Fish Tanks

PRO-4-DJ

100GPD | 380LPD

Sink Mixer & 1/2”
+ 3/4” Garden Taps

Marine Aquariums + Some Freshwater Fish Tanks

PRO-4-DJ

150GPD | 525LPD

Sink Mixer & 1/2”
+ 3/4” Garden Taps

Marine Aquariums + Some Freshwater Fish Tanks

PRO-4-DJ

180GPD | 685LPD

Sink Mixer & 1/2”
+ 3/4” Garden Taps

Marine Aquariums + Some Freshwater Fish Tanks

This system is locally assembled using high quality approved parts

Standard pre-filters will filter +/- 10,000 litres of water before needing to be changed [based on total flow of pure + waste water] whereas the high flow Matrikx CTO combination of pre-filters will allow 30,000 litres to be filtered before the pre-filters need to be changed.

SYSTEM INCLUDES:

  • Powder coated, mild steel folded bracket
  • 3x 10"x2.5" white or clear tinted filter housings [vertical ones]
    • 1x 10"x2.5" 0.5uM poly spun sediment filter
    • 1x 10"x2.5" standard carbon block [+/- 10,000 litres] or Matrikx high volume carbon filter [+/- 30,000 litres on average town mains water]
    • 1x 10"x2.5" white or clear long life post membrane mixed DI resin filter [twice as much resin as in line post filters]
  • 1x high quality reverse osmosis membrane [flow rate depends on selection in drop down menu]
  • 3x meters of high pressure 1/4" | 6mm water filter tubing
  • 1x opening + closing housing ring spanner
  • 1x standard* sink mixer diverter connector
  • 2x garden tap connectors for 1/2" + 3/4" taps
  • 1x manual first flush valve

* Standard mixer taps refer to a mixer tap where you can unscrew the aerator on the end of the tap and will be left with either a 20mm female thread or a 23mm male thread. If you have the 20mm female thread you'll need to use the inside to outside thread converter [supplied with the diverter valve] to connect but if you have a 23mm male thread after removing the aerator you won't need to use the thread converter

Easy to carry around and great for topping up freshwater aquariums, caravaning, camping and home use + produces 190-685 litres per day depending on mains water pressure, feed water quality and system selected

The reverse osmosis process results in the purest possible water and results in the total dissolved solids (TDS) count dropping by between +/- 99.9% and 100% with a post membrane DI

This purification process is commonly considered to be the most effective method of purification available to the public, and will consistently produce the lowest level of contaminant.

RO will reduce/remove all of contaminant in the feed water including chlorine, fluoride, volatile organic compounds, disinfection by-products and heavy metals

See below table for effective reduction of common contaminants:

ELEMENT/COMPOUND

% REDUCTION

ELEMENT/COMPOUND

% REDUCTION

Barium

99.9%

Potassium

100%

Bicarbonate

100%

Radium

99.9%

Cadmium

99.9%

Selenium

99.9%

Calcium (Hardness)

100%

Silicate

100%

Chromate

99.9%

Silver

100%

Copper

99.9%

Sodium

100%

Detergents

99.9%

Strontium

99.9%

Fluoride

100%

Sulphate

100%

Lead

99.9%

PCB’s

99.9%

Magnesium

100%

Insecticides

99.9%

Nickel

99.9%

Herbicides

99.9%

All of the parts that come into contact with the water in our systems are manufactured from BPA free food grade plastics. All of the filters and parts that we source are of the highest quality and meet the required quality standards.

Membrane brand/s of the membrane supplied with the system may vary depending from those depicted what we have in stock but will be of equivalent quality

This RO system is a multi-stage pumpless system. It is designed to operate on mains pressure and will produce with feed water pressure of 45psi or greater.

This RO unit has a 36 month warranty which is subject to our warranty terms and conditions and is installed with a pressure reducing valve and leak shut off device

If you are not entirely satisfied with your purchase please contact us so that we can try to resolve your concerns