PFAS PFOA FOREVER CHEMICALS REMOVAL REVERSE OSMOSIS WATER FILTER
PFAS / PERFLUOROALKYL AND POLYFLUOROALKYL PFOA "FOREVER CHEMICALS REMOVAL "7 STAGE REVERSE OSMOSIS WATER PURIFIER
SPECIALLY DESIGNED WITH MOST EFFECTIVE PRE-FILTERS, RO MEMBRANE, WASTE RATIO AND POST FILTER COMBINATION FOR HIGHER REMOVAL OF PFAS, FOREVER CHEMICALS FROM DRINKING WATER
THIS SYSTEM IS ASSEMBLED LOCALLY AT OUR PREMISES IN QLD
NOTE: Please ignore images of the three in line post filters in the main listing image as they will be supplied per the individual images and as described in detailed listing text.
Replacement filter packs to fit the Forever Chemicals Removal RO unit listed as
Our locally assembled reverse osmosis units are designed to provide the purest possible drinking water at a reasonable price. All of our locally assembled units are leak tested overnight under pressure and checked to ensure that they are operating optimally and producing water of a standard that meets our quality guidelines.
We can supply this unit as a standard reverse osmosis unit or an alkalising one [select in drop down selection menu] as there are many claimed health benefits from drinking alkaline water including a few listed [1] greater absorption of alkaline water then non-alkaline water [2] soothing acid reflux [3] increased oxygen levels in the bloodstream and improved energy [4] has anti-oxidant properties which is believed to have anti-ageing and anti-disease effects [5] supports the immune system and [6] assist with overall improved health.
Reverse osmosis technology is known for its ability to produce pure water of a consistent quality, typically reducing the total contaminant in the feed water by +/- 97% on average. Our systems are effective in removing / reducing various contaminants from your drinking water, including fluoride, chlorine, cysts, bacteria and heavy metals among many other contaminants as indicated in the table below.
|
CONTAMINANT
|
REDUCTION
|
CONTAMINANT
|
REDUCTION
|
|
Barium
|
97%
|
Potassium
|
99.9%
|
|
Bicarbonate
|
99.9%
|
Radium
|
97%
|
|
Cadmium
|
97%
|
Selenium
|
97%
|
|
Calcium (Hardness)
|
99.9%
|
Silicate
|
99%
|
|
Chromate
|
95%
|
Silver
|
99%
|
|
Copper
|
97%
|
Sodium
|
98%
|
|
Detergents
|
97%
|
Strontium
|
97%
|
|
Fluoride
|
99%-99.9%
|
Sulphate
|
99.9%
|
|
Lead
|
97%
|
PCB’s
|
97%
|
|
Magnesium
|
99.9%
|
Insecticides
|
97%
|
|
Nickel
|
97%
|
Herbicides
|
97%
|
All of the parts that come into contact with the water in our systems are manufactured from BPA free food grade plastics. All of the filters and parts that we source are of the highest quality and meet the required quality standards.
SYSTEM SPECIFICATIONS:
|
Minimum feed pressure
|
45psi / 300kpa
|
|
Recommended feed pressure
|
60-80psi / 400-550kpa
|
|
Minimum operating temperature
|
5°C / 40°F
|
|
Maximum operating temperature
|
45°C / 110°F
|
|
Minimum feed water pH
|
pH 3
|
|
Maximum feed water pH
|
pH 11
|
|
Maximum feed water TDS
|
1000ppm*
|
|
Production rate
|
50GPD / 200LPD
|
*Where the feed water TDS reading is high, the minimum operating pressure of the unit may be affected. If your feed water TDS is in excess of 400ppm we recommend that you consult us before you purchase. Generally, these systems are suited to most town mains water supplies, however if you are intending to use the unit on tank or bore water we recommend testing the feed pressure and water quality first.
KIT INCLUDES:
- Multi stage reverse osmosis unit:
- AS3497 tested and compliant 10"x2.5" pre-filter housings.
- 1x 10"x2.5" 0.5 micron spun sediment pre-filter.
- 2x 5uM Matrikx KX chloramine reduction Hi-Vol CBC.
- 1x 50GPD Filmtec Dow / Du Pont USA made membrane.
-
3x inline post RO filters as selected in drop down menus.
- Your choice of one of the following accumulator tanks:
- 5 Litre - (33cm height, 20cm diameter).
- 8 Litre - (39cm height, 22cm diameter).
- 12 Litre - (39cm height, 28cm diameter).
- Includes 1/2" insert - shares normal cold water line to most mixer taps but if you need a 3/4" insert to share the tap feeding your dishwasher send a message when checking out asking for us to make this change to your order.
- Includes leak detection and shut off device.
- 50mm adjustable waste drain line clamp.
- Optimal waste ratio for what is best suited to your local post code mains water and set higher then a typical reverse osmosis water filter to allow a higher percentage of forever and other synthetic chemicals to be flushed away which results in purer produce water.
- Modern style faucet as selected in drop down menu.
- An approved 350kpa pressure reducing valve as required by Australian standards.
- A housing spanner to open and close water filter housings.
- An installation kit including a roll of tubing, a roll of thread tape, spare fittings.
- An installation and maintenance guide.
This RO unit has a 36-month warranty which is subject to our warranty terms and conditions and is installed with a pressure reducing valve and leak shut off device
This listing includes a 350kpa pressure reducing and non-return valve as required by Australian Standards AS3497. We also recommend that a leak detector shut off device is installed with any water filter and / or reverse osmosis system which is under pressure.
If you are not entirely satisfied with your purchase please contact us so that we can resolve your concerns.
Why Choose the PFAS PFOA "Forever Chemicals" Removal Reverse Osmosis Water Filter?
This 7-Stage Reverse Osmosis Water Purifier is a specially designed system for the effective removal of PFAS, PFOA, and other "forever chemicals" from your drinking water. Assembled locally in Queensland, this unit features a combination of high-performance pre-filters, a top-quality RO membrane, and a unique waste ratio setting to ensure a higher percentage of synthetic chemicals are flushed away. It is a premium solution for anyone concerned about these persistent contaminants in their water supply.
Compact Design and Powerful Performance
This comprehensive system includes a 0.5-micron spun sediment pre-filter, followed by two Matrikx KX chloramine reduction Hi-Vol CBC filters, which are crucial for this type of purification. The core of the unit is a 50GPD Filmtec Dow / DuPont USA-made membrane. The system can be configured as a standard or an alkalizing unit and includes your choice of a 5, 8, or 12-litre accumulator tank. It operates on a minimum feed pressure of 45psi and can produce up to 200 litres per day.
Seamless Integration and Easy Maintenance
The system comes with a full installation kit, including a modern faucet, a 350kpa pressure reducing valve, a leak detection and shut-off device, tubing, and fittings to connect to your cold water line. The optimal waste ratio is pre-set based on your local postcode's mains water to ensure the highest purity. All water-contact parts are made from BPA-free food-grade plastics, and the entire unit is backed by a 36-month warranty.
