Reverse Osmosis RO DI Dental Autoclave Filter RODI ROP4-DJ with Pressure Pump

Reverse Osmosis RO DI Dental Autoclave Filter RODI ROP4-DJ with Booster Pump

4 STAGE REVERSE OSMOSIS RO DI DENTAL AUTOCLAVE FILTER RODI ROP4-DJ WITH PRESSURE BOOSTER PUMP
4-Stage Demineralising Water Purifier + Deioniser + Booster Pump + All Filters

This RO DI system is assembled locally using high-quality, approved parts. Each unit is individually flushed, the membrane is tested, and the complete system is pressure tested at our factory before dispatch.

The ROP4-DJ model includes an integrated diaphragm booster pump with transformer to maintain constant optimal pressure on the RO membrane — ensuring peak purification performance and consistent output, even where mains water pressure is low.

The system includes a final-stage mixed-bed DI resin filter. Production volume depends on the membrane selected in the drop-down menu. With the booster pump operating, the system achieves optimal water flow and efficiency at the correct membrane pressure.

This filter produces the purest possible water, reducing Total Dissolved Solids (TDS) to between 0–0.5 ppm, removing 99.9%–100% of all substances and impurities.

See below table for effective reduction of common contaminants:

All parts that come into contact with water are manufactured from BPA-free, food-grade plastics. All filters and fittings are sourced from trusted suppliers and meet the required quality and safety standards.

All components in contact with the water are made from BPA-free, food-grade plastics, and all filters and fittings are manufactured to meet or exceed strict quality and safety standards.

KIT INCLUDES

Multi-Stage Reverse Osmosis Unit (H = 48cm × W = 37cm × D = 20cm):

• AS3497 Watermark 10" × 2.5" pre-filter housings

• One 10" × 2.5" 0.5-micron spun sediment pre-filter

• One 10" × 2.5" standard or high-volume carbon block

• One diaphragm pressure booster pump with transformer (integrated)

• One TFC membrane made with materials sourced from the USA

• One 10" × 2.5" high-volume mixed resin post-membrane deionising filter

Accumulator Tank:

• 12-Litre – (35cm height, 28cm diameter)

Feed / Inlet Fittings:

• ½" insert – Shares normal cold water line to most mixer taps

• ¾" insert – Shares normal cold water line to most dishwashers

Waste Drain Fittings:

• 50mm adjustable clamp

Accessories:

• Modern all-chromed drinking water faucet tap

• Approved 550kPa pressure reducing valve (as required by Australian Standards)

• Non-return valve (AS3497 compliant)

• Leak detection and automatic shut-off device with 2x sensor pads

• Housing spanner for easy filter changes

• Installation kit (tubing, thread tape, and spare fittings)

• Installation and maintenance guide

This RO unit has a 36 month warranty which is subject to our warranty terms and conditions and is installed with a pressure reducing valve and leak shut off device

Why Choose the RODI Reverse Osmosis Dental Autoclave Filter (ROP4-DJ)?

The ROP4-DJ Reverse Osmosis Deionisation System is a high-performance, 4-stage purification unit specifically designed for dental autoclaves, sterilisation equipment, and dental practices requiring ultra-pure, demineralised water.

Assembled and tested locally, it delivers 0–0.5 ppm TDS water, eliminating virtually all dissolved solids, minerals, and contaminants — preventing autoclave scaling and ensuring optimal steriliser performance.

With its integrated booster pump, the ROP4-DJ guarantees constant pressure and high flow rates through the membrane, maintaining consistent water quality even in low-pressure installations.

Compact Design and Reliable Performance

Built from high-quality, BPA-free food-grade components, this compact 4-stage system combines sediment filtration, carbon adsorption, reverse osmosis, and deionisation to produce pure, sterile-grade water. The built-in booster pump enhances pressure stability, increases membrane life, and ensures maximum efficiency.

Seamless Integration and Compliance

Supplied as a complete kit ready for installation, the ROP4-DJ is AS3497 WaterMark compliant and factory pressure-tested prior to dispatch. The system includes all fittings, valves, and accessories required for professional installation in dental environments.

Covered by a 36-month warranty, this RO DI unit offers unmatched purity, pressure-stable performance, and long-term reliability — ensuring your autoclave and instruments operate with the highest quality water possible.

If you are not entirely satisfied with your purchase, please contact us so that we can resolve your concerns.