6 STAGE REVERSE OSMOSIS WATER PURIFIER
DOMESTIC UNIT WITH ULTRA-VIOLET STERILISER & INSTALL KIT
THIS SYSTEM IS ASSEMBLED LOCALLY AT OUR PREMISES IN QLD
Our locally assembled reverse osmosis units are designed to provide the purest possible drinking water at a reasonable price. All of our locally assembled units are leak tested overnight under pressure and checked to ensure that they are operating optimally and producing water of a standard that meets our quality guidelines.
Reverse osmosis technology is known for its ability to produce pure water of a consistent quality, typically reducing the total contaminant in the feed water by +/- 96% on average. Our systems are effective in removing / reducing various contaminants from your drinking water, including fluoride, chlorine, cysts, bacteria and heavy metals among many other contaminants as indicated in the table below.
CONTAMINANT |
REDUCTION
|
CONTAMINANT
|
REDUCTION
|
Barium
|
97%
|
Potassium
|
99.9%
|
Bicarbonate
|
99.9%
|
Radium
|
97%
|
Cadmium
|
97%
|
Selenium
|
97%
|
Calcium (Hardness)
|
99.9%
|
Silicate
|
99%
|
Chromate
|
95%
|
Silver
|
99%
|
Copper
|
97%
|
Sodium
|
98%
|
Detergents
|
97%
|
Strontium
|
97%
|
Fluoride
|
99%-99.9%
|
Sulphate
|
99.9%
|
Lead
|
97%
|
PCB’s
|
97%
|
Magnesium
|
99.9%
|
Insecticides
|
97%
|
Nickel
|
97%
|
Herbicides
|
97%
|
All of the parts that come into contact with the water in our systems are manufactured from BPA free food grade plastics. All of the filters and parts that we source are of the highest quality and meet the required quality standards.
SYSTEM SPECIFICATIONS:
Minimum feed pressure
|
45psi / 300kpa
|
Recommended feed pressure
|
60-80psi / 400-550kpa
|
Minimum operating temperature
|
5°C / 40°F
|
Maximum operating temperature
|
45°C / 110°F
|
Minimum feed water pH
|
pH 3
|
Maximum feed water pH
|
pH 11
|
Maximum feed water TDS
|
1000ppm*
|
Production rate
|
50GPD / 190LPD
|
*Where the feed water TDS reading is high, the minimum operating pressure of the unit may be affected. If your feed water TDS is in excess of 400ppm we recommend that you consult us before you purchase. Generally these systems are suited to most town mains water supplies, however if you are intending to use the unit on tank or bore water we recommend testing the feed pressure and water quality first.
KIT INCLUDES:
- Multi stage reverse osmosis unit:
- AS3497 compliant 10"x2.5" pre-filter housings.
- One 10"x2.5" 1 micron spun sediment pre-filter.
- Two 10"x2.5" 5 micron coconut carbon block pre-filter.
- One 50GPD Sentry Water Filters TFC membrane.
- One in line post membrane coconut carbon water filter.
- One 6w ultra violet UV water sterilising unit with ballast
- Your choice of one of the following accumulator tanks:
- 5 Litre - [Per picture 8 = 33cm height x 20cm diameter].
- 8 Litre - [Per picture 9 = 39cm height x 22cm diameter].
- 12 Litre - [Per image10 = 39cm height x 28cm diameter].
- Feed/inlet fitting included is 1/2" insert - Shares normal cold water line to most mixer taps but if you need the 3/4" one to share a dishwasher tap instead leave a message when checking out and we'll make this change.
- 50mm adjustable waste water drain clamp fitting.
- Select drinking water tap in selection drop down menu per images 6 and 7.
- One approved pressure reducing valve [required by Australian Standards AS3497].
- You select if you want a leak shut off device included per image 13.
- A housing spanner to open and close water filter housings.
- An installation kit including a roll of tubing, a roll of thread tape, spare fittings.
- An installation and maintenance guide.
NOTE: UV sterilisers produce a small amount of heat when operating. If left to sit for an extended period of time the water inside the UV steriliser can warm up, this may mean that the first glass of water out of the system is warm. If this is an issue we offer silver based antibacterial filters that can be used in place of the UV steriliser.
This RO unit has a 24 month warranty which is subject to our warranty terms and conditions and is installed with a pressure reducing valve and leak shut off device
This listing includes a 350kpa pressure reducing and non-return valve as required by Australian Standards AS3497. We also recommend that a leak detector shut off device is installed with any water filter and / or reverse osmosis system which is under pressure which we sell separately in our store
All of the parts that come into contact with the water in our systems are manufactured from BPA free food grade plastics. All of the filters and parts that we source are of the highest quality and meet the required quality standards.
If you are not entirely satisfied with your purchase please contact us so that we can try to resolve your concerns