Water Filter + Reverse Osmosis Faucet Taps RO Drinking Faucet Tap

FILTERED DRINKING WATER FAUCET / TAPS

All these faucets have a shiny chrome finish except for the brushed nickel one which has a satin finish faucet and the matte black one.

This listing is for a drinking water filter faucet / tap only and does not include a water filter or reverse osmosis filtration system.

This faucet can be fitted to any water filter system using 1/4" tube [OD = 6mm] and  is supplied with an olive, insert and compression nut as standard. You can select to have a quick fit connector added to your order for $5 extra which screws onto the bottom of the faucet [does not require thread tap as it has an O-Ring in the fitting] and the tube just pushes into the tube side of the fitting. It's important which these quick fit fittings to not overtighten them as they are a polymer fitting so overtightening them with a spanner can cause them to crack. If you firmly hand tighten them or lightly with a tool and observe there are drips for a day after fitting them that will be sufficient.

Great quality + Lead free + Manufactured according to Australian standards

Approved In Australia For Use With Under Sink Water Filters And / Or Reverse Osmosis Purification Systems | WELS Not Applicable 

This faucet carries a full 12 month warranty on all parts supplied in the original order, this subject to our standard terms and conditions listed in our operating manual

According to regulatory standards any water filter system under constant water pressure [regardless of the brand or supplier] is required to be fitted with an AS3497 approved pressure reducing valve and back-flow prevention device which we have listed separately. We also recommend that a leak detector shut off device is installed with any water filter and / or reverse osmosis system that is under pressure which we have listed separately on our store.

If you are not entirely satisfied with your purchase please contact us so that we can resolve your concerns.