RON4-DJ Reverse Osmosis RO DI Dental Autoclave Filter RODI

4-Stage Demineralising Water Purifier  + Deioniser + All Filters

This RO DI system is assembled locally using high quality approved parts + we flush and test the membrane + the system is pressure tested at our factory before being dispatched.

Includes final stage DI resin filter + Production volume depends on membrane selected in drop down menu and based on mains water pressure [needs to exceed 45psi for this system to work] with optimal production between 65psi to 75psi.

This filter produces the purest possible water and the total dissolved solids count drops to between 0-0.5ppm using this system

Between 99.9% to 100% of all substances and impurities in water are removed by RODI

See below table for effective reduction of common contaminants:

All of the parts that come into contact with the water in our systems are manufactured from BPA free food grade plastics. All of the filters and parts that we source are of the highest quality and meet the required quality standards.

KIT INCLUDES:

• Multi stage reverse osmosis unit (H=48cm x W=37cm x D=20cm):
• AS3497 Watermark 10"x2.5" pre-filter housings.
• One 10"x2.5" 0.5 micron spun sediment pre-filter.
• One 10"x2.5" standard or high volume carbon block.
• One TFC membrane made using materials sourced from the USA.
• One 10"x2.5" high volume mixed resin post membrane deionising filter.
• The following accumulator tank:
• 12 Litre - (35cm height, 28cm diameter).
• Both of the following feed/inlet fittings:
• 1/2" insert - Shares normal cold water line to most mixer taps.
• 3/4" insert - Shares normal cold water line to most dishwasher.
• Both of the following waste drain clamp fittings:
• 40mm solid clamp.
• 50mm adjustable clamp.
• A modern style all chromed drinking water faucet tap.
• An approved 350kpa pressure reducing valve as required by Australian standards.
• A leak detection and shut off device with 2x sensor pads.
• A housing spanner to open and close water filter housings.
• An installation kit including a roll of tubing, a roll of thread tape, spare fittings.
• An installation and maintenance guide.

This RO unit has a 36 month warranty which is subject to our warranty terms and conditions and is installed with a pressure reducing valve and leak shut off device

This listing includes a 350kpa pressure reducing and non-return valve as required by Australian Standards AS3497

If you are not entirely satisfied with your purchase please contact us so that we can try to resolve your concerns