Our locally assembled reverse osmosis units are designed to provide the purest possible drinking water at a reasonable price. All of our locally assembled units are leak tested overnight under pressure and checked to ensure that they are operating optimally and producing water of a standard that meets our quality guidelines.
Reverse osmosis technology is known for its ability to produce pure water of a consistent quality, typically reducing the total contaminant in the feed water by +/- 96% on average. Our systems are effective in removing / reducing various contaminants from your drinking water, including fluoride, chlorine, cysts, bacteria and heavy metals among many other contaminants as indicated in the table below.
CONTAMINANT
REDUCTION
CONTAMINANT
REDUCTION
Barium
97%
Potassium
99.9%
Bicarbonate
99.9%
Radium
97%
Cadmium
97%
Selenium
97%
Calcium (Hardness)
99.9%
Silicate
99%
Chromate
95%
Silver
99%
Copper
97%
Sodium
98%
Detergents
97%
Strontium
97%
Fluoride
99%-99.9%
Sulphate
99.9%
Lead
97%
PCB’s
97%
Magnesium
99.9%
Insecticides
97%
Nickel
97%
Herbicides
97%
All of the parts that come into contact with the water in our systems are manufactured from BPA free food grade plastics. All of the filters and parts that we source are of the highest quality and meet the required quality standards.
SYSTEM SPECIFICATIONS:
Minimum feed pressure
45psi / 300kpa
Recommended feed pressure
60-80psi / 400-550kpa
Minimum operating temperature
5°C / 40°F
Maximum operating temperature
45°C / 110°F
Minimum feed water pH
pH 3
Maximum feed water pH
pH 11
Maximum feed water TDS
1000ppm*
Production rate
50GPD / 200LPD
*Where the feed water TDS reading is high, the minimum operating pressure of the unit may be affected. If your feed water TDS is in excess of 400ppm we recommend that you consult us before you purchase. Generally these systems are suited to most town mains water supplies, however if you are intending to use the unit on tank or bore water we recommend testing the feed pressure and water quality first.
KIT INCLUDES:
Multi stage reverse osmosis unit:
Powder coated bracket
AS3497 tested and compliant 10"x2.5" pre-filter housings.
One 10"x2.5" 1 micron spun sediment pre-filter.
One 10"x2.5" 5 micron coconut carbon block pre-filter.
One 50GPD TFC membrane made using materials sourced from USA.
In line post membrane conditioning water filters as selected.
Your choice of one of the following accumulator tanks:
5 Litre - (30cm height, 20cm diameter).
8 Litre - (35cm height, 22cm diameter).
12 Litre - (35cm height, 28cm diameter).
Your choice of one of the following feed/inlet fittings:
1/2" insert - Shares normal cold water line to most mixer taps.
3/4" insert - Shares normal cold water line to most dishwasher.
Your choice of one of the following waste drain clamp fittings:
40mm solid clamp.
50mm adjustable clamp.
An all chrome modern faucet as pictured in the listing images.
An approved 350kpa pressure reducing valve as required by Australian standards.
A housing spanner to open and close water filter housings.
An installation kit including a roll of tubing, a roll of thread tape, spare fittings.
An installation and maintenance guide
All of the parts that come into contact with the water in our systems are manufactured from BPA free food grade plastics. All of the filters and parts that we source are of the highest quality and meet the required quality standards.
This RO unit has a 24-month warranty which is subject to our warranty terms and conditions and is installed with a pressure reducing valve and leak shut off device
We recommend that a leak detector shut off device is installed with any water filter and / or reverse osmosis system which is under pressure which we sell separately in our store
