• Fish Tank Reverse Osmosis Water Filters | RO DI Filter PRO-4-D 100GPD + DIVERT
  • Fish Tank Reverse Osmosis Water Filters | RO DI Filter PRO-4-D 100GPD + DIVERT
  • Fish Tank Reverse Osmosis Water Filters | RO DI Filter PRO-4-D 100GPD + DIVERT
  • Fish Tank Reverse Osmosis Water Filters | RO DI Filter PRO-4-D 100GPD + DIVERT
  • Fish Tank Reverse Osmosis Water Filters | RO DI Filter PRO-4-D 100GPD + DIVERT
  • Fish Tank Reverse Osmosis Water Filters | RO DI Filter PRO-4-D 100GPD + DIVERT
  • Fish Tank Reverse Osmosis Water Filters | RO DI Filter PRO-4-D 100GPD + DIVERT
1 7

Sentry Water Filters

Fish Tank Reverse Osmosis Water Filters | RO DI Filter PRO-4-D 100GPD + DIVERT

Fish Tank Reverse Osmosis Water Filters | RO DI Filter PRO-4-D 100GPD + DIVERT

$309.95 AUD
$309.95 AUD
Sale Sold out
Taxes included. Shipping calculated at checkout.

4-Stage Portable | Wall Mount RO Purifier + Filters

PRODUCT CODE: PRO-4-D

Includes final stage post RO membrane mixed resin deionising [DI] filter

Our systems are assembled locally using high quality approved parts

Easy to carry around or wall mountable and great for producing pure H2O for topping or filling up fish tanks

* Standard mixer taps refer to a mixer tap where you can unscrew the aerator on the end of the tap and will be left with either a 20mm female thread or a 23mm male thread. If you have the 20mm female thread you`ll need to use the inside to outside thread converter [in the 3rd picture and supplied with this item] to connect but if you have a 23mm male thread after removing the aerator you won`t need to use the thread converter

The reverse osmosis process results in the purest possible water and results in the total dissolved solids (TDS) count dropping by +/- 96% depending on environmental factors

As this system also has a final stage mixed resin deioniser after the reverse osmosis membrane the removal rate increases to between 99.9%-100%

This purification process is commonly considered to be the most effective method of purification available to the public, and will consistently produce the lowest level of contaminant

This system will produce +/- 380 litres per day [depending on the purity required and the quality of feed water this can vary by up to +/-10%]

RO will reduce/remove all of contaminant in the feed water including chlorine, fluoride, volatile organic compounds, disinfection by-products, heavy metals, etc

See below table for effective reduction of common contaminants:

ELEMENT/COMPOUND % REDUCTION ELEMENT/COMPOUND % REDUCTION
Barium 99.9% Potassium 100%
Bicarbonate 100% Radium 99.9%
Cadmium 99.9% Selenium 99.9%
Calcium (Hardness) 99.9% Silicate 99.9%
Chromate 99.9% Silver 99.9%
Copper 99.9% Sodium 99.9%
Detergents 99.9% Strontium 97%
Fluoride 100% Sulphate 100%
Lead 99.9% PCB’s 99.9%
Magnesium 100% Insecticides 99.9%
Nickel 99.9% Herbicides 99.9%

All water contact parts are manufactured from high quality food grade plastics and all our filters and systems have the relevant NSF INTERNATIONAL (National Sanitation foundation), WQA (Water Quality Association) or FDA (Food and Drug Administration) quality standard approvals.

SYSTEM INCLUDES:

  • Powder coated, mild steel folded bracket
  • Two 10"x2.5" tinted clear pre-filter housings
    • One 10"x2.5" spun sediment filter
    • One 10"x2.5" carbon block filter
  • One NSF certified 100GPD reverse osmosis membrane
  • One post membrane final stage in line resin deionising filter
  • Three meters of high pressure 1/4" | 6mm water filter tubing
  • One standard* sink mixer diverter valve with thread converter

This RO unit has a 24 month warranty which is subject to our warranty terms and conditions and is installed with a pressure reducing valve and leak shut off device

View full details