Inline Poly Spun Sediment Water Filter | In Line Particle, Dirt, Sand, Silt Filters

Inline poly spun sediment water filter for fridges + coolers + bubblers

This inline poly spun sediment filter is compatible with all fridge brands using inline filters, as well as coolers, bubblers, ice makers, and coffee machines.

• Fits standard ¼" (6mm) outside diameter hose with quick-fit connectors
• Filters sediment particles down to 5 micron

Important Notes:

• This is a particulate sediment filter only. It does not reduce chemicals, dissolved solids, or other impurities. It is typically used as a pre-filter before a chemical reduction filter such as carbon or a carbon/KDF55 media blend.
  
• Requires ¼” NPT threaded to ¼” tube (OD ±6mm) quick-fit connectors. Apply 6–10 wraps of plumbing tape to the threaded side before installation.

Regulatory Compliance:

Under current standards, any water filter system operating under constant pressure—regardless of brand or supplier—must be fitted with an AS3497-approved pressure-reducing valve and back-flow prevention device (see image 7). These components are listed separately and available for purchase.

We also recommend installing a leak detector shut-off device (see image 8) with any water filter or reverse osmosis system under pressure. This is also available for purchase.

If for any reason you're not entirely satisfied with your purchase, please contact us so we can address your concerns.