Portable Reverse Osmosis Drinking + Camping Water Filter RO PRO4/G/A/N/MG

This system is locally assembled by us in our Queensland factory using high quality approved parts

100% Fluoride Removal + 99.99% Bacteria Elimination + Approximately 96% off impurities in water removed

Supplied with both tap connectors to fit 1/2" + 3/4" garden taps which measures 20mm + 25mm in diameter and a standard* sink mixer diverter valve

* Standard mixer taps refer to a mixer tap where you can unscrew the aerator on the end of the tap and will be left with either a 20mm female thread or a 23mm male thread. If you have the 20mm female thread you`ll need to use the inside to outside thread converter [supplied with the diverter valve] to connect but if you have a 23mm male thread after removing the aerator you won`t need to use the thread converter

Easy to carry around and great for caravanning, camping and home use + produces +/- 190 to 570 litres per 24 hours depending item selected and mains water pressure and quality of feed water

4-stage filter unit with 1x spun sediment + 1x carbon block filter + 1x selected reverse osmosis membrane (50GPD/ 75GPD/ 100GPD or 150GPD) + 1x post membrane as selected

The reverse osmosis process results in the purest possible water and results in the total dissolved solids (TDS) count dropping by between +/- 96% depending on environmental factors

This purification process is commonly considered to be the most effective method of purification available to the public, and will consistently produce the lowest level of contaminant.

RO will reduce/remove all of contaminant in the feed water including chlorine, fluoride, volatile organic compounds, disinfection by-products and heavy metals

See below table for typical reduction of common contaminants by reverse osmosis

All of the parts that come into contact with the water in our systems are manufactured from BPA free food grade plastics. All of the filters and parts that we source are of the highest quality and meet the required quality standards.

SYSTEM INCLUDES:

• Two White Opaque OR Clear Tinted filter housings on a wall mountable bracket
• Two 10"x2.5" filter cartridges [1x 1uM sediment + 1x 5uM carbon block]
• One reverse osmosis membrane with flow rate as selected
• One post membrane in line conditioning filter as selected
• Three meters of high pressure 1/4" | 6mm water filter tube
• Tap connectors to fit a 3/4" garden tap and common garden hose clip on fitting as well as a sink mixer diverter valve

All of the parts that come into contact with the water in our systems are manufactured from BPA free food grade plastics. All of the filters and parts that we source are of the highest quality and meet the required quality standards.

This RO system is a multi-stage pumpless system. It is designed to operate on mains pressure and will produce with feed water pressure of 45psi or greater.

This RO unit has a 12-month warranty which is subject to our warranty terms and conditions, regular filter changes to be done as recommended using our replacement filters, media and consumables and is installed indoors out of direct sunlight.

Why Choose the Portable + Wall Mountable Reverse Osmosis Purifier?

This Portable + Wall Mountable Reverse Osmosis Purifier is a versatile and high-performance system for clean drinking water. Locally assembled in a Queensland factory using high-quality approved parts, this 4-stage unit is perfect for caravanning, camping, and home use. It's designed to be a complete solution, removing up to 96% of impurities, including 100% of fluoride and 99.99% of bacteria, depending on the post-filter selected.

Compact Design and Powerful Performance

This system is built for powerful performance in a compact design. It features a spun sediment filter, a carbon block filter, and a selectable reverse osmosis membrane (50GPD to 150GPD). You can also choose from various post-membrane filters, such as Alkalising, Silver Anti-bacterial, or Mineral + Carbon, to customize your water's properties. The system can produce +/- 190 to 570 litres per 24 hours.

Seamless Integration and Easy Maintenance

This RO purifier is designed for a simple, no-plumbing setup. It comes with a wall-mountable bracket and connectors for both garden taps and a standard sink mixer diverter valve. The kit includes all necessary tubing and fittings, making installation straightforward. The unit is designed to operate on mains pressure of 45psi or greater and comes with a 12-month warranty.