Sentry Water Filters

PRO-5-DJ Reverse Osmosis RODI | Marine Aquarium RODI Fish Filter

$299.50 AUD

Sale Sold out

Taxes included. Shipping calculated at checkout.

PRO-5-DJ REVERSE OSMOSIS RODI | MARINE AQUARIUM RODI FISH FILTER

High Volume* | Low Waste* Portable + Wall Mountable Reverse Osmosis RODI Purifier Marine Aquarium

We supply these systems with a manual first flush valve (see image 13) so you can direct the first bit of water produced out the waste line then through the RO to which allows resin to last longer. This flush valve can also be set to increase your operating waste ratio which is required in some areas where the TDS of the local water is high.

* high volume pre-membrane filters and resin cartridge can handle higher volumes than the standard filters allowing less frequent filter changes i.e. with these systems standard pre-filters will need to be changed every +/- 7,500 litres produced and high volume pre-filters every +/- 25,000 litres produced.

*Two RO membranes configured in series to reduce average waste from approximately 60% to around 35%. In this standard setup, the waste stream from the first membrane is further purified by the second membrane, significantly improving overall recovery.

Note: At your request membranes can alternatively be configured in parallel to increase flow rate, though this will result in a higher waste ratio. A series configuration—where the permeate from the first membrane feeds into the inlet of the second—is particularly beneficial when dealing with high-TDS source water, such as groundwater or bore water commonly found in WA and other regional areas.

Depending on variation selected in drop down menu above we will supply as follows

Item	Flow Rate 24 Hours	Water Inlet Connector	Recommended Use
RO-5-DJ 75G+50G	100GPD 380LPD	Sink Mixer & 1/2” + 3/4” Garden Taps	Marine + Some Freshwater Aquariums
PRO-5-DJ 100G+75G	150GPD 570LPD	Sink Mixer & 1/2” + 3/4” Garden Taps	Marine Aquariums + Some Freshwater Fish Tanks
PRO-5-DJ 150G+100G	225GPD 855LPD	Sink Mixer & 1/2” + 3/4” Garden Taps	Marine Aquariums + Some Freshwater Fish Tanks
PRO-5-DJ 180G+150G	300GPD 1,150LPD	Sink Mixer & 1/2” + 3/4” Garden Taps	Marine Aquariums + Some Freshwater Fish Tanks

Note: Testing of flow rates, waste ratio's and TDS readings were done with water at 28 degrees Celsius, 80psi water pressure and feed water with a TDS reading of 105ppm.

This system is locally assembled using high quality approved parts

SYSTEM INCLUDES:

Powder coated, mild steel folded bracket
3x 10"x2.5" white opaque or clear tinted filter housings [vertical ones]

1x 10"x2.5" 0.5uM poly spun sediment filter
1x 10"x2.5" Matrikx CTO high volume carbon filter
1x 10"x2.5" jumbo post RO mixed DI resin filter [2.5x as much resin as in line post DI filters]

2x high quality reverse osmosis membranes connected in series [flow rate depends on selection in drop down menu]
3x meters of high pressure 1/4" | 6mm water filter tubing
1x opening + closing housing ring spanner
1x standard* sink mixer diverter connector
2x garden tap connectors for 1/2" + 3/4" taps
1x manual first flush valve

Supplied with a tap connector to fit 1/2" + 3/4" garden taps [measures 20mm + 25mm in diameter respectively] as well as a standard* sink mixer diverter valve

* Standard mixer taps refer to a mixer tap where you can unscrew the aerator on the end of the tap and will be left with either a 20mm female thread or a 23mm male thread. If you have the 20mm female thread you'll need to use the inside to outside thread converter [supplied with the diverter valve] to connect but if you have a 23mm male thread after removing the aerator you won't need to use the thread converter

Easy to carry around and great for topping up freshwater aquariums, caravanning, camping and home use + produces 190-685 litres per day depending on mains water pressure, feed water quality and system selected

The reverse osmosis process results in the purest possible water and results in the total dissolved solids (TDS) count dropping by between +/- 99.9% and 100% with a post membrane DI

This purification process is commonly considered to be the most effective method of purification available to the public and will consistently produce the lowest level of contaminant.

RO will reduce/remove all of contaminant in the feed water including chlorine, fluoride, volatile organic compounds, disinfection by-products and heavy metals

See below table for effective reduction of common contaminants:

ELEMENT/COMPOUND	% REDUCTION	ELEMENT/COMPOUND	% REDUCTION
Barium	99.9%	Potassium	100%
Bicarbonate	100%	Radium	99.9%
Cadmium	99.9%	Selenium	99.9%
Calcium (Hardness)	100%	Silicate	100%
Chromate	99.9%	Silver	100%
Copper	99.9%	Sodium	100%
Detergents	99.9%	Strontium	99.9%
Fluoride	100%	Sulphate	100%
Lead	99.9%	PCB’s	99.9%
Magnesium	100%	Insecticides	99.9%
Nickel	99.9%	Herbicides	99.9%

All of the parts that come into contact with the water in our systems are manufactured from BPA free food grade plastics. All of the filters and parts that we source are of the highest quality and meet the required quality standards.

Membrane brand/s of the membrane supplied with the system may vary depending from those depicted what we have in stock but will be of equivalent quality

This RO system is a multi-stage pumpless system. It is designed to operate on mains pressure and will produce with feed water pressure of 45psi or greater.

This RO unit has a 36-month warranty which is subject to our warranty terms and conditions and is installed with a pressure reducing valve and leak shut off device

If you are not entirely satisfied with your purchase, please contact us so that we can try to resolve your concerns

Why Choose the PRO-5-DJ High Volume Reverse Osmosis Filter?

The PRO-5-DJ High Volume Reverse Osmosis RODI Purifier is an advanced, high-performance system designed for marine aquariums and other applications requiring ultra-pure water. This unit is locally assembled and uniquely features two reverse osmosis membranes connected in series, which significantly reduces the waste ratio from approximately 60% to 30%. This system is capable of producing water with a TDS reduction of 99.9% to 100%, making it an ideal choice for maintaining the sensitive environment of a marine fish tank.

Compact Design and Powerful Performance

This 5-stage unit is built on a powder-coated mild steel bracket and includes three 10"x2.5" filter housings. The filtration stages include a 0.5µm spun sediment filter, a high-volume Matrikx CTO carbon filter, two RO membranes in series, and a jumbo post-RO mixed DI resin filter. The system is available with various flow rate options, from 100GPD (380LPD) to 300GPD (1,150LPD), ensuring a high-volume supply of purified water. It operates on mains pressure of 45psi or greater and includes a manual first flush valve to help extend the life of the resin.

Seamless Integration and Easy Maintenance

The PRO-5-DJ is designed for portability and comes with a full installation kit, including a sink mixer diverter connector and garden tap connectors. All water-contact parts are made from BPA-free food-grade plastics. The unit is backed by a 24-month warranty, subject to the installation of a pressure reducing valve and a leak shut-off device.