Sentry Water Filters
Reverse Osmosis Filter Kit +/- RO RODI DI Membrane Water Filters HRO-D|G|A|GM
Reverse Osmosis Filter Kit +/- RO RODI DI Membrane Water Filters HRO-D|G|A|GM
Couldn't load pickup availability
REPLACEMENT FILTER KITS FOR OUR HRO SERIES SYSTEMS
SELECT PRE + POST FILTERS + MEMBRANE FLOW RATE FROM DROP DOWN MENU
CHOOSE KIT TO SUIT YOUR MODEL NUMBER + IF YOU NEED A MEMBRANE + THE MEMBRANE FLOW RATE YOU WANT
REPLACE PRE + POST FILTER EVERY 6-12 MONTHS DEPENDING ON MODEL AND MEMBRANES EVERY 2-3 YEARS
NOTE: BRAND OF MEMBRANE AND FILTERS MAY VARY FROM THOSE IN THE PICTURES
| VARIABLES | FILTERS SUPPLIED | SYSTEM FLOW RATE |
|---|---|---|
| HRO-3-G NO MEM | 1x In line GAC RO pre-filter 1x Inline GAC post RO filter |
Depends on system membrane |
| HRO-3-D NO MEM | 1x In line GAC RO pre-filter 1x Inline RO DI post filter |
Depends on system membrane |
| HRO-3-N NO MEM | 1x In line GAC RO pre-filter 1x Silver infused post RO filter |
Depends on system membrane |
| HRO-3-A NO MEM | 1x In line GAC RO pre-filter 1x Alkalising* post RO filter |
Depends on system membrane |
| HRO-4-MG NO MEM | 1x In line GAC RO pre-filter 1x Mineralising post RO filter 1x Inline GAC RO post filter |
Depends on system membrane |
| 50GPD MEMBRANE | 50GPD RO + Filters Selected | +/- 9 Litres Per Hour @ 55PSI |
| 75GPD MEMBRANE | 75GPD RO + Filters Selected | +/- 13 Litres Per Hour @ 55PSI |
| 100GPD MEMBRANE | 100GPD RO + Filters Selected | +/- 17 Litres Per Hour @ 55PSI |
| 150GPD MEMBRANE | 150GPD RO + Filters Selected | +/- 23 Litres Per Hour @ 55PSI |
*Alkalising filter may be supplied as magnesium or calcite unless you specifically request one of these two options
Reusable quick-fit fittings not supplied with the above filters as you should be able to reuse your current ones
Replacement filter kits excluding and including membranes for our HRO-3-G + HRO-3-D + HRO-3-N + HRO-3-A + HRO-4-MG units
The reverse osmosis process results in the purest possible water and results in the total dissolved solids (TDS) count dropping by between +/- 95% and 99.9% depending on environmental factors and post filter variation selected
This purification process is commonly considered to be the most effective method of purification available to the public, and will consistently produce the lowest level of contaminant.
RO will reduce/remove all of contaminant in the feed water including chlorine, fluoride, volatile organic compounds, disinfection by-products and heavy metals
See below table for effective reduction of common contaminants using this system [will reduce when resin becomes saturated]:
| ELEMENT/COMPOUND | % REDUCTION | ELEMENT/COMPOUND | % REDUCTION |
|---|---|---|---|
| Barium | 100% | Potassium | 100% |
| Bicarbonate | 100% | Radium | 100% |
| Cadmium | 100% | Selenium | 100% |
| Calcium (Hardness) | 100% | Silicate | 100% |
| Chromate | 100% | Silver | 100% |
| Copper | 100% | Sodium | 100% |
| Detergents | 100% | Strontium | 100% |
| Fluoride | 100% | Sulphate | 100% |
| Lead | 100% | PCB's | 100% |
| Magnesium | 100% | Insecticides | 100% |
| Nickel | 100% | Herbicides | 100% |
All water contact parts are manufactured from high quality food grade plastics and all our filters and systems have the relevant NSF INTERNATIONAL (National Sanitation Foundation), WQA (Water Quality Association) or FDA (Food and Drug Administration) quality standard approvals. All plastics are manufactured to be BPA free.
Some images in this listing may show items that are not included in the sale. They are there for information, to show how the product is used with other products or to show related products. If you have any doubt about what is included, just send us a quick message and we'll confirm and clarify for you.
Share







































